ONOFF
XCBT
Driver Kuro

Choose from

TWO TYPES of XCBT DRIVERS

Meticulously crafted detail, unrivalled high performance.

1 / 15

THE EVOLUTION OF KURO

-6 TECHNOLOGIES-

Technology 1

SOLE

Rigid Sole Piece and POWER TRENCH

The Rigid Sole Piece helps deflect more power through the flex of the POWER TRENCH, reducing energy loss and increasing ball speeds.

Technology 2

FACE

The evolution of our POWER TRENCH helps expand the sweet spot.

The new Power Trench helps minimize distance lost on miss-hits, especially lower on the face.

FACE LASER MILLING

The laser milling around the center area of the face is lighter, to help reduce spin to create more distance. On the outside area of the face, the laser milling is more dense, ensuring that miss-hits still produce stable and optimal spin. Keep your drives straight even on off-center strikes.

BEADLESS CUP FACE

The body and the face are made of light weight titanium, and the beadless cup face ensures there is no unnecessary weight from welding. The thinnest face in KURO history creates the largest sweet spot and most spring effect.

Technology 3

CROWN

KURO'S HIGHEST MOI HEAD EVER

1. By increasing the face length and 2. the head width (compared to the previous model), KURO driver increases the feeling of stability and increases confidence at address. With KURO's largest-ever high-MOI head, not only is it easier to swing but also the higher MOI creates a smoother and more consistent swing.

The use of a high-rigidity carbon crown allows for an even lower center of gravity. The distinctive raised ribs on the crown, inspired by our ONOFF O-Mark design, enhances rigidity and minimizes energy loss, resulting in a powerful, low-spin trajectory.

Technology 4

SHAFT & GRIP

ORIGINAL SHAFT CREATED WITH DAIWA CARBON TECHNOLOGY CBT:626D

An original carbon shaft made with DAIWA CARBON TECHNOLOGY and designed to maximize distance and consistency.

SWING ASSIST TECHNOLOGY

The use of Tungsten Prepreg helps stabilize the butt area of the shaft (where the hands are) to create more consistency allowing golfers to reproduce the same swing. Also by stiffening the tip of the shaft, the club becomes more stable even with a larger head. More power is transmitted to the ball at impact.

*Tungsten Prepreg: Tungsten Powder mixed with carbon sheets and resin

NEW GRIP WITH CROSS BALANCE TECHNOLOGY

Our new ONOFF GR CBT grip is a joint collaboration with grip maker STM. A fine carbon embossed pattern not only looks fantastic but reduces grip slippage. A seamless design across the entire grip means performance and feel doesn't change no matter where you place your hands.

NEW LABOSPEC SHAFTS

In order to fit a wider variety of golfer with our original shafts, ONOFF introduces new LABOSPEC shafts made with DAIWA CARBON TECHNOLOGY.

LABOSPEC SHAFT SPECIFICATIONS

Technology 5

XCBT

Create the club that fits your swing and the feeling that you want with ONOFF's one of a kind Cross Balance Technology.

CHANGE THE SWING WEIGHT FOR YOUR CLUB

You can Cross (exchange) the weights between the head and grip to alter the swing weight of the club to better match your swing.

Technology 6

OTCS

Changing the weight screw can alter trajectory and swing feel

Exchange the weight, adjust trajectory

The standard 8g weight screw can be exchanged with heavier or lighter weight screws (sold separately) which alters the swing weight of the club and the center of gravity position. This way you can match the feel of the club to match your swing and alter the ball flight. For every 2g changed on the head, the swing weight is altered by 1 point.

TRAJECTORY CUSTOMIZATION

Trajectory adjustment through shaft sleeve

By changing the sleeve position, each golfer can fine tune the club trajectory. Loft, lie and face angle can all be changed from the standard setting.

*Using the OTCS Sleeve adjustment requires a dedicated torque wrench (sold separately)

SLEEVE POSITION

*Not compatible with Fairway Wood or Utility sleeves.

OPTIONAL
(please see dealer for costs)

DEDICATED TORQUE WRENCH FOR HEAD + POUCH

DEDICATED GRIP END WRENCH

ADDITIONAL WEIGHT SCREWS

Standard weight screws are included with the club.

Important information about ONOFF Trajectory Control System and the removal and installation of weights on our heads and grips.

Please note that even though they use the same weights, there are dedicated wrenches for both the club head and the grips. These wrenches are not interchangeable. Be sure to use the grip wrench only for the grip and the head torque wrench only for the head.