ONOFF Driver Aka

Spec

Dynamic Head x Cross Balance Technology

Create The Fastest Ball Speeds
and The Most Distance.

By using a DYNAMIC HEAD (a head with more weight), the club can accelerate faster through the swing and create more force at impact. A unique and first of its kind cross balance technology allows players to adjust swing weight on the fly to create a club that is easier to swing for everyone, regardless of the heavier head. Increased swing speed, increased ease of use, and a more powerful impact create the fastest ball speeds and a whole new level of distance performance for ONOFF DRIVER AKA.

Creating more distance and forgiveness

Triple Power Trench For Aka

The head shape flexes at impact and then is powerfully restored as the ball shoots off the face. More spring effect and more efficient energy transfer mean higher ball speeds and straighter shots. The sweet spot area is increased meaning less distance lost on miss hits and shots that still end up in the fairway. The new triple POWER TRENCH expands the sweet spot so that even toe and heel misses still fly far. Power Trench, unparalleled distance, and forgiveness.

3 x Power Trench

AKA Power Trench design results in more forgiveness and more distance.

The POWER TRENCHES in both the sole and crown work together at impact to create more consistent flex and more efficient energy transfer. The result is a wider and taller sweet spot which minimizes distance loss from miss-hits.

POWER TRENCH (POWER CIRCLE RIB)

The rigidity of the body has been considerably improved by evolving the rib structure inside. The Power Circle Rib encircles the entire head which allows the face to flex more powerfully and more consistently resulting in more spring effect for more distance and a wider sweet spot.

HIGH REBOUND FACE

Using new high strength titanium and an integrated face and body design, the AKA driver pushes the limits of the rules for spring effect. The face structure not only increases repulsion but widens the sweet area significantly and improves the feel at impact. More forgiveness and more distance.

NEXT GENERATION CLUB TECHNOLOGY

Cross Balance Technology

Our unique Cross Balance Technology allows players to not only fine tune the head weight but to also swap the weights between the head and grip with our dedicated wrench. An all-new system that allows swing weight changes on the fly. Customize the swing weight to match your desired feel for an easier swing. In addition to the standard weights, other weights are sold separately to help fine tune the optimal performance for each golfer.

FINE TUNE FOR EASIER SWING

Customize the swing weight

Adjusting the head weight screws (optional weights are sold separately) allow golfers to change the weight of the head and fine tune the swing weight. The standard screws in the head total 8g (2+6) and for every 2g changed, the swing weight will change by 1 point.

CUSTOMIZE HEAD WEIGHT

Create maximum ball speeds

By exchanging the weights between the head and grip end, golfers can find their optimal swing weight, the right balance between the heavier head and overall club feel, allowing them to swing more easily for maximum performance. The standard weights in the head are (2g + 6g) for a total of 8g. The standard grip weight is 3g.

This table is an example of switching the standard head screws (2g + 6g) with the standard grip screw (3g). Optional weights ranging from 1 to 12g are sold separately.

FINE TUNE YOUR TRAJECTORY

-OTCS-

ONOFF Trajectory Contorol System

CUSTOM TRAJECTORY 1

FINE TUNE LOFT, LIE AND FACE ANGLE USING ADJUSTABLE SLEEVE

OTCS SLEEVE

Set the optimal loft and lie angle for optimal trajectory and distance

You can tune loft lie and face angle.
This map shows changes from standard setting.

SLEEVE POSITION

CUSTOM SHOT TRAJECTORY

FINE TUNE HEAD BIAS BY CHANGING WEIGHT POSITIONS

WEIGHT SCREWS

Moving weight screws in head can change the swing weight AND the trajectory

Changing the position of the three weights will adjust trajectory. Golfers can fine tune their shot to increase distance.

TRAJECTORY EXAMPLES

The back weight adjusts the height of the shot (Mid to High).
The heel weight adjusts the direction of the shot (Strong draw or weak draw).

By re-arranging the standard 2 weights, 2 types of trajectory adjustment are possible. Optional weights are also sold separately.

OPTIONAL WEIGHTS

You can fine tune the head even further with optional weights

*Please check with your local dealer for pricing

STANDARD KIT(Included with purchase)

Standard weight screws (pre-installed)

  • Torque Wrench for Head screws
  • Grip end wrench
  • Pouch
  • User Manual

GUIDE FOR TRAJECTORY CONTROL SYSTEM
AND FOR WEIGHT SCREW USAGE

Please use with caution and enjoy safe and fun golf!

VIEW USER MANUAL/PDF

The manufacturer is not responsible for any damages or injuries caused by neglecting the instructions warnings contained in our user manual. Please read the manual carefully and use the product with caution.

POINT

Be sure to use the proper wrench when removing or installing screws in the head and grip. If the proper wrench is not used, the weight may come loose or detached or damaged.

Optimizing the performance of the dynamic head

A SPECIAL AND ORIGINAL SHAFT MADE WITH DAIWA CARBON TECHNOLOGY TO MATCH THE DYNAMIC HEAD

Our Dynamic head not only creates a more powerful trajectory thanks to its heavier weight but it also increases the overall weight of the club and the overall swing weight. The swing weight can be adjusted through our new Cross Balance Technology and by creating an all new, lighter weight [SMOOTH KICK MP-522D] shaft featuring DAIWA CARBON TECHNOLGY, we are able to increase performance by also reducing the weight. This “Balance” improves the overall club feel and makes it easier to swing resulting in more distance and forgiveness. The club becomes more consistent and squares to the head without the player having to worry about timing. Swing naturally, more distance.

Spec

ONOFF
Driver Aka

HEAD MATERIAL
HST140C TITANIUM FACE + BODY
CARBON CROWN, WEIGHT SCREW x 2 (2g (Ti), 6g (Tungsten)
SHAFT
SMOOTH KICK MP-522D
GRIP
ONOFF CBT RUBBER (GRIP 43g + Weight 3g (Stainless)) NO BACK LINE

DEDICATED HEAD TORQUE WRENCH, DEDICATED GRIP END WRENCH, POUCH, HEAD COVER

CONFORMING TO SLE RULES

Made in Japan